OneStock features integrations with multiple carriers. Carrier integrations can be managed directly from the Order Management Center. Depending on the carrier, the configuration will be form-based or code based. Carrier configuration feature the use of test values, which allow overriding initial value by test ones.

Carrier configurations can be set at the site level and overridden per stock location, for example, in case credentials are not the same between all your stock locations.

Site level configurations

General carrier configurations

This is configurations that impact all carriers. For example, you can set the default carrier that should be used in case none is set in the order.

Open

New generation carrier configurations (form-based)

This is the configuration section for our latest carrier generation, featuring our form-based configurations screens.

To start configuring a carrier you just need to add it at start setting it up.

Open

Required fields are flagged with a *. Make sure to set them up.

Code based carrier configurations

We strive to progresively support a larger number of carriers in the form-based format. In the meanwhile, those not yet included in the former are supported in code-based format.

Stock location overriding

Site configurations can be overridden per stock location by going to Stock Locations>Stock Loction (1 or many)>Carriers (New Version)

Deploy OAuth authetication for multiple stock locations

1. Use the Id Multi Select filter to select all stock locations associated with a common account.

2. Click "Select All".

3. Click "Modify".

4. Navigate to the "Carrier New" tab.

5. Select "UPS" then "Credentials".

6. At the bottom right, click on "Oauth Authentication".

   1. If the account owner is a franchiser, copy the link and send it to them for completion from step 8 onwards.

7. Open the link in a new page.

8. Enter your UPS credentials.

9. Accept the terms and conditions.